Commonly Used Handle Clamp Exothermic welding(NHC)

An oxy-fuel welding torch handle Exothermic welding(NHC) is a part of oxy-fuel welding equipment that is used to hold the graphite mold in place during welding. This is necessary to protect the user’s hands from the intense heat and sparks.

Types of oxy-fuel welding torch handles(Exothermic welding):

  • Simple handles:These are the most common type of handle and consist of an insulated handle and a metal clamp for attaching to the graphite mold
  • Locking handles:These handles have a locking mechanism that secures the mold in place and prevents it from moving accidentally
  • Shielded handles: These handles have a protective shield that is designed to further protect the user’s hands from sparks and molten metal spatter.

Tips for choosing an oxy-fuel welding torch handle:

  • Type of welding: The type of welding you will be doing will determine the type of handle you need. For example, if you are doing heavy welds, you will need a locking handle.
  • Comfort: The handle should be comfortable to grip and easy to use for extended periods of time.

Where to buy an oxy-fuel welding torch handle:

Oxy-fuel welding torch handles can be purchased from welding supply stores and online.

Safety tips:

  • Always use the appropriate handle for the type of welding you are doing.
  • Inspect the handle for damage before each use.
  • Always wear gloves and safety glasses when using the handle.

Additional information:

  • The term “NHC” may stand for “Non-locking Handle Clip” or “Non-Hinged Clamp”.
  • Oxy-fuel welding is a type of welding that uses a mixture of oxygen and a fuel gas, such as acetylene or propane, to create a high-temperature flame.
  • Oxy-fuel welding can be a dangerous process if not done properly. It is important to follow safety precautions and to use the correct equipment.

Leave a Reply